1. WIPE THE SURFACE ON THE RACK
Wipe the surface of your paddle rack with water / window cleaner / isopropanol or similar to remove dirt and grease. Let dry.
2. SPRAY ON ZLICEIT S1 PRO spray
Apply Zlicit S1 spray by placing the spray nozzle about 25-30 cm from the rack.
Spray evenly over the rack’s impact surface.
A light film of Zliceit S1 PRO will now be visible on the rack’s impact surface
3. POWDER RACKET MED ZLICEIT S1 PRO GRIP
Now use the Zliceit S1 PRO grip.
Turn the aluminum cap so that you see that there is a small opening.
Adjust the opening to the desired amount of grip. Angle the rack at an angle to the floor (preferably over a trash can or similar). Sprinkle ZLICEIT S1 PRO grip over the surface where you sprayed ZLICEIT S1 PRO spray. DO NOT OVERDOSE! There will be more grip than you think.
Vinkla racket snett ner mot golvet (gärna över en papperskorg eller liknande). Strö ZLICEIT S1 PRO grip över ytan där du sprayat ZLICEIT S1 PRO spray. ÖVERDOSERA INTE! Där kommer mer grip än vad man tror.
4. Spray ZLICEIT S1 PRO spray in the same way as step 2
5. Repeat STEP 2 and STEP 3 on the other side of the rack if desired.
6. let the rack stand leaning against a road and dry for about 10-30 min.
7 Turn the spray bottle upside down.
Spray the liquid with 2-3 pressures.
Wipe the spray nozzle with glue liquid.
(For best storage, unscrew the spray nozzle and pump ordinary tap water. Then unscrew the spray nozzle.)
Remove ZLICEIT PRO S1
1. Soak a towel and place on a flat surface. Then place the selected impact surface down against the towel. Let lie for 60 min.
2. Pick up the rack and carefully scrape off the application of Zliceit PRO S1 with some form of plastic scraper.
3. If all the desired application does not go away after the first attempt, repeat steps 1 and 2.
There may be a light film on the paddle rack.